Sierra-monitor-corporation IZS31 User Manual

Doc. No.IZ*-OMK0015 - B OPERATION MANUAL PRODUCT NAME: Ionizer MODEL: IZS31 Series ○Read this operatio

9  Auto balance sensor Horizontally place the auto balance sensor under the ionizer and face its metal plate upward. Because the ion balance will

10 2. Connect the lead wires in accordance with the lead wire list. (See Chapter 4) Arrange lead wires in accordance with the wiring table. The un

11 3. DC mode Plasma ions or minus ions are continuously discharged. The parts other than the charged object need to be grounded to prevent them fro

12４．Selection and setting of equipment 4-１．Sensing DC mode 1. Selection of bar length ・Select the length applicable to work size base on static

13 6. Wiring of the power supply cable ・Connect dedicated power supply cables.  Connection with the power supply for ionizer operation Symbol C

148. LED display  POWER LED ・・・ The power supply input and the connection of the sensors are displayed. LED name Functions MAIN Lights

159. Alarm Type of alarm Description How to reset Abnormal high voltage Notifies when overcurrent such as high voltage leakage occurs. The ion-d

164-2. Pulse DC mode 1. Selection of the bar length ・Select an appropriate length that is suitable for the work size, static charge elimination char

175. Setting of the frequency selecting switch ・Select the ion-production frequency. Ion-production frequency Switch setting 1Hz 0 3Hz 1 5Hz 2 1

188. LED display  POWER LED ・・・ The power supply input and the connection of the sensors are displayed. LED name Functions MAIN Lights up

1 INDEX 1.Sefety instructions・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 2 2.Installation・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 6 2-1.Installation

199. Alarm Type of alarm Description How to reset Abnormal high voltage Notifies when overcurrent such as high voltage leakage occurs.The ion-di

204-3．DC mode 1. Selection of bar length ・Select the length applicable to work size base on static charge elimination area and static charge elim

21 6. LED display  POWER LED ・・・ The power supply input and the connection of the sensors are displayed. LED name Functions MAIN Light

224-4. Power supply cable connection circuit NPN Note) Because the sensor monitor output （OUT4：Dar

23 PNP Note) Because the sensor monitor output （OUT4：Dark Green） is not insulated from the in

24５．Specifications 5-1． Ionizer Ionizer model ＩＺＳ３１（ＮＰＮ） ＩＺＳ３１Ｐ（ＰＮＰ） Type Corona discharge Voltage supply method Sensing DC, pulse DC, Plus DC,

255-2． Sensor Sensor model IZS31-DF (Feed back sensor） IZS31-DG (Auto-balance sensor) Operating ambient temp 0 to 50 ℃ Operating ambient humidity

2 1. Safety instructions These safety instructions are intended to prevent hazardous situations and/or equipment damage. These instructions indicate

3 WARNING 1. This product is intended to be used for the general FA devices. If other applications (especially the ones indicated in 4 on page 2) are

45. Do not touch electrode needle with finger or metal tool directly. It may cause injury. If electrode needle or cartridge is it may stick to the fi

5 9. Be sure there is no incorrect wiring before operation. Incorrect wiring may cause product breakage or malfunction. 10. Flush pneumatic piping b

6accident. 3. Do not open the case to disassemble and reconstruct the product. It may cause electric shock, operation failure and disaster such as f

7 3. Mount intermediate brackets on the ionizer body at regular interval. 4. Tap M5 thread on the brackets mounting positions at the insta

8 6. Be sure to ground the DC1 (-) lead wire [blue] of the power supply cable (Resistance between the lead wire and the earth ground should be 100Ω